Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the third brake light of the Peugeot 208?

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part:

Facing the work described in the subject, it is not difficult at all, anyone with good will can succeed. You only need a screwdriver to remove the locking screw inside the third stop, in order to free it and remove it from the rear hatch. Once here, we can disconnect its rear power connector and replace the entire stop, or proceed with just changing the bulb. To clarify the ideas better, the subject we are talking about is shown in the presentation video, available to anyone who has any doubts.

Posted on 3 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper on a Peugeot 208?
How to Remove the Rear Bumper on a Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) In this tutorial, you will see how to remove the rear bumper on a Peugeot 208, an extremely simple and quick task. First, open the boot lid, then rem…
How to replace the third brake light bulb on the Peugeot 208
How to replace the third brake light bulb on the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) When the third brake light stops working, it is necessary to replace the bulbs located inside the headlight. Today we will explain how to perform thi…
How to replace the rear window water tube of the Peugeot 208.
How to replace the rear window water tube of the Peugeot 208.
Peugeot 208 (2012-2019 / A9, MK 1) Let's see how to solve a common problem with the Peugeot 208 MK1: the rubber tube that carries the fluid for the rear window washer dries out and har…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos