Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light on Peugeot 208

Model: Peugeot 208 UB, UJ, UP, MK 2, UW - Years 2019-2026
Part: Tail light

In this guide, we will cover the main instructions on how to remove and replace the rear light on a Peugeot 208. First, open the rear boot lid and start by removing the side trim, thus accessing the inside of the light; disconnect the electrical connector and unscrew the fixing screw of the light, removing it from the outside, as shown in the video. At this point, if necessary, replace the stop lights by either changing the bulbs or the entire light; reassemble the light and check the operation of all stop lights.

Posted on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light from a Peugeot 208
How to Remove the Rear Light from a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Here's how to remove the rear light from a Peugeot 208. Open the boot and secure it (using the automatic strut); locate the securing screws for the r…
Replacing Rear Bulb on Peugeot 208
Replacing Rear Bulb on Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In this video, learn how to replace the rear brake bulb on a Peugeot 208 in simple steps. First, open the boot and remove the side plastic cover. The…
How to disassemble the external rearview mirror of the Peugeot 208
How to disassemble the external rearview mirror of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) If you want to replace the external rearview mirror of your first edition Peugeot 208 by yourself, all you have to do is follow all the steps describ…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos