Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Fog Light on a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Fog lights

In this brief guide, discover the steps to remove and replace the rear fog light on a Peugeot 208. First, move to the rear of the vehicle and gently detach the rear bumper to access the inside of the fog light; then unscrew the two side screws, disconnecting the electrical connector to remove the fog light, as illustrated in the video. At this point, replace the rear fog light bulb or the entire unit; install the fog light and check its proper functioning!

Posted on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Headlamp of a Peugeot 208
How to Remove the Rear Headlamp of a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) This guide describes the procedure for removing the rear headlamp of your Peugeot 208. First, ensure the car is parked safely and completely turned o…
How to disassemble the rear headlight of the Peugeot 208
How to disassemble the rear headlight of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In the following guide, we will describe the entire procedure that you need to follow in order to disassemble the rear light of your first series Peu…
How to disassemble the rear headlight of the Peugeot 208 2017
How to disassemble the rear headlight of the Peugeot 208 2017
Peugeot 208 (2012-2019 / A9, MK 1) In the following guide you will find all the steps you need to follow in order to dismantle the entire rear light of your Peugeot 208 (2017). First o…

Other guides you may be interested in

How to Reset the Tyre Warning Light on a Toyota Aygo 2022

To reset the tyre warning light on your Toyota Aygo Mk2 (2022), follow the steps in this guide. First, get into the driver's seat and turn on the instrument panel. Then, press the menu button located on the left side of the steering wheel. Scroll through the options and select "Vehicle settings". Next, enter "TPWS setting" and press "Set pressure". Finally, confirm the operation, and shortly after, the manual reset procedure will be successfully completed.

Watch the video!


by ScegliAuto

More videos