Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear fog light bulb of the Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Fog lights

Today we will discover the instructions that will allow us to disassemble and replace the rear fog light bulb of the Peugeot 208. First, we open the rear hatch of the trunk and start unscrewing the screws of the rear lights, disconnecting the electrical connectors of the lights to remove them; then we unscrew the fixing screws of the rear bumper, also located on both sides of the wheel arches, as shown in the video. Once the bumper is removed, we remove the fog light, replacing the bulb with the new one; we check the operation of the fog light and reassemble everything!

Posted on 4 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Battery of a Peugeot 208 Remote
Replacing the Battery of a Peugeot 208 Remote
Peugeot 208 (2012-2019 / A9, MK 1) In this short video today, you will see how to replace the battery of a Peugeot 208 remote. The operation is very simple, and you will only need a sm…
Removing the Rear Bumper of the Peugeot 208
Removing the Rear Bumper of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Follow these instructions to remove and replace the rear bumper of the Peugeot 208 in simple steps. First, open the boot and start unscrewing the fix…
Replacing the Fuel Pump on a Peugeot 208
Replacing the Fuel Pump on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Follow these instructions to remove and replace the fuel pump on a Peugeot 208 in simple steps. First, open the rear doors and start by removing the …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos