Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Courtesy Lights on the Peugeot 208 - 308

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Light bulb

In this video tutorial, you will learn how to remove and replace the courtesy or interior lights of the vehicle (specifically those located at the bottom on the front side) of the Peugeot 208 first series, as well as the 308 and 2008. First, get inside the vehicle and start by removing the light fitting by prying at the sides with something thin; then disconnect the electrical connector of the bulb and remove the bulb from the fitting, as shown in the video. At this point, replace the bulb with a new one (in this case, a LED bulb is installed).

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the antenna on the Peugeot 208?
How to replace the antenna on the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To replace the antenna on the Peugeot 208, use a tool to pry off the courtesy light cover located at the front upper part of the car roof: once remov…
How do you deactivate the Start and Stop system in the Peugeot 208?
How do you deactivate the Start and Stop system in the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) .. valid for several models, Peugeot 208, Peugeot 308, Peugeot 3008, etc. Turn on the instrument panel, press the button with the car symbol, then the.. …
Replacing the Number Plate Lights on the Peugeot 208
Replacing the Number Plate Lights on the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In this brief guide, you will find instructions that will allow you to dismantle and replace the bulbs of the number plate lights on the Peugeot 208.…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos