Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : How to replace the battery of the Peugeot 208

Peugeot 208 - Video tutorial

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Battery
Operation: How to replace the battery of the Peugeot 208

In English:

Briefly, we will see the necessary instructions that will allow us to dismantle and replace the battery of the remote control key for the Peugeot 208, as well as the 2008 and the 308. First, take the remote control in your hand and start levering on the side slot of the cover to release it and remove it; this way we will have access to the battery, as shown in the video. At this point, remove and replace the battery with the new one, of the correct type and with the same code; insert it in the correct direction and reattach the plastic cover of the remote control!


Posted on 16 February 2024 by ScegliAuto

    Frequently Asked Questions

    • 208 2012-2019 - How much does the battery in the Peugeot 208 cost? Read Answer
    • 208 2012-2019 - What to do when the Peugeot 208 does not start? Read Answer
    • 208 2012-2019 - Why does the Peugeot 208 not start? Read Answer
    • 208 2019-2026 - How much does it cost to replace the Peugeot 208 battery? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos