Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Battery

In this guide, we will see the instructions that will allow us to disassemble and replace the battery of the Peugeot 208, following the instructions below. First, open the hood and start by disconnecting both battery terminals (positive and negative); then unscrew the fixing screw of the battery bracket, so that we can remove it from its compartment, as shown in the video. At this point, remove and replace the battery with the new one, of the correct type and having the same amperage; make the electrical connection of the terminals and start the engine!

Posted on 19 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Peugeot 208?
How do you replace the battery of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) It will be possible to replace the battery of the Peugeot 208 by opening the hood to access the components in the engine compartment: here you will f…
Replacing the Battery in a Peugeot 208 1.2 Puretech
Replacing the Battery in a Peugeot 208 1.2 Puretech
Peugeot 208 (2012-2019 / A9, MK 1) Follow these simple steps to remove the engine battery from a Peugeot 208. First, open the bonnet of your vehicle and disconnect the two battery term…
How to Replace the Battery in a Peugeot 208 1.4 BlueHDI?
How to Replace the Battery in a Peugeot 208 1.4 BlueHDI?
Peugeot 208 (2012-2019 / A9, MK 1) To replace the battery in a Peugeot 208 1.4 BlueHDI, open the bonnet to access the engine bay, as the battery will be located on the right side of th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos