Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the third brake light bulb on the Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part:

See other generations:
Video tutorial

When the third brake light stops working, it is necessary to replace the bulbs located inside the headlight. Today we will explain how to perform this action on a Peugeot 208. First, open the trunk and using a Phillips screwdriver, unscrew the screw located on the inside of the headlight.

Close the trunk and remove the headlight by disconnecting the connector. Remove all the bulbs inside the headlight and proceed with their replacement.

Connect the connector and insert the headlight into its housing, then screw in the locking screw. Turn on the vehicle's lights to test the bulbs, if they do not work, check the status of the fuse related to the headlight.


Posted on 14 January 2025 by ScegliAuto


Related tutorials

Replacing Rear Bulb on Peugeot 208
Replacing Rear Bulb on Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) In this video, learn how to replace the rear brake bulb on a Peugeot 208 in simple steps. First, open the boot and remove the side plastic cover. The…
Removing Boot Light Bulb on Peugeot 208
Removing Boot Light Bulb on Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) In this video, you will see how to remove the boot light bulb from a Peugeot 208, but the procedure is similar or even identical on other Peugeot mod…
How to replace the rear light bulb on the Peugeot 208?
How to replace the rear light bulb on the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) To replace the rear light bulb on the Peugeot 208, open the bonnet to detach the plastic panel on the side of the boot: beneath this panel, there wil…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos