Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Boot Light Bulb on Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Light bulb

In this video, you will see how to remove the boot light bulb from a Peugeot 208, but the procedure is similar or even identical on other Peugeot models. First, open the boot lid: you need to remove the ceiling light to access the bulb; to do this, pull from one corner downwards to extract the entire bulb holder. Disconnect the electrical connector by pressing the tab and pull it out. Separate the ceiling light by pulling it and replace the bulb with a suitable one!

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Headlight Bulb of a Peugeot 208
How to Remove the Headlight Bulb of a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Before starting, open the bonnet of your Peugeot 208. Begin by unclipping and removing the rear cover of the bulb by simply pulling it outwards. Next…
How to Replace the Rear Light Bulbs on a Peugeot 208
How to Replace the Rear Light Bulbs on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) This brief video tutorial shows how to replace the rear light bulbs on a first-generation Peugeot 208, produced from 2012 to 2019. To remove the ligh…
How to Replace the Front Headlamp Bulb on a Peugeot 208
How to Replace the Front Headlamp Bulb on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) These brief and simple steps will show you how to remove and replace the dipped beam bulb of the front headlamp on a Peugeot 208. First, open the bon…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos