Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : Light bulb

Peugeot 208 - Light bulb

Light Bulb Peugeot 208 (2012-2019 / mk 1, a 9)

Peugeot 208 (2012-2019 / MK 1, A9)
How to replace the dipped beam bulb on the Peugeot 208 MK1?
To replace the dipped beam bulb on the Peugeot 208 MK1, open the bonnet and locate the rubber cover at the back of the headlight assembly. Remove it to access …Read all…
Posted on 21 July 2026 by ScegliAuto
Peugeot 208 (2012-2019 / MK 1, A9)
How to Replace the Courtesy Lights on the Peugeot 208 - 308
In this video tutorial, you will learn how to remove and replace the courtesy or interior lights of the vehicle (specifically those located at the bottom on …Read all…
Posted on 9 August 2026 by ScegliAuto
Peugeot 208 (2012-2019 / MK 1, A9)
How to Replace the Indicator Bulb of the Peugeot 208 Wing Mirror?
To replace the indicator bulb located on the wing mirror of the Peugeot 208, lever in the area between the glass and the housing. Detaching the glass from its …Read all…
Posted on 9 August 2026 by ScegliAuto
Peugeot 208 (2012-2019 / MK 1, A9)
How to Replace the Headlight Bulbs on a Peugeot 208?
To replace the dipped beam bulbs on a Peugeot 208, open the bonnet to access the engine bay. Next, remove the cover cap on the side of the grille: once …Read all…
Posted on 2 June 2026 by ScegliAuto
Peugeot 208 (2012-2019 / MK 1, A9)
Removing Boot Light Bulb on Peugeot 208
In this video, you will see how to remove the boot light bulb from a Peugeot 208, but the procedure is similar or even identical on other Peugeot models. …Read all…
Posted on 16 April 2026 by ScegliAuto
Airbag (1) Alternator (1) Speaker (2) Shocks (5) Antenna (1) Air conditioning (1) Car stereo (35) Anti-roll bar (1) Roof rack bars (1) Battery (29) Control arm (2) Spark plugs (5) Glow plugs (1) Body (6) Control unit (1) Key (30) Timing belt (17) V-belt (4) Air conditioner (1) A/C controls (2) Onboard computer (34) Checks and maintenance (50) Throttle body (1) Dashboard (10) Brake rotors (3) Headlight (17) Tail light (12) Fog lights (11) Diesel particulate filter (2) Air filter (20) Cabin air filter (27) Diesel fuel filter (6) Oil filter (1) Parking brake (2) Clutch (4) Grille (3) Window switch (2) Accessory kit (1) Light bulb (5) Side marker bulb (2) Headlight bulb (20) Tail light bulb (9) Interior dome light bulb (2) Antifreeze coolant (2) Instrument panel light (2) License plate light (9) (2) Handle (2) Transmission fluid (1) Engine oil (10) Clock (37) Door trim panel (18) Front bumper (9) Rear bumper (5) Brake pads (7) Tires (3) Shift knob (8) Fuel pump (1) Car door (2) Instrument cluster (10) Wheel (3) Fuse box (45) Seat (5) Brake system (1) Oxygen sensor (1) Side mirror (25) AdBlue warning light (11) Warning light – error code (34) (1) Tire pressure warning light (51) Service warning light (154) Manufacturer emblem (2) Fuel cap (2) Windshield wipers (7) Blower motor (4) Side window (2) Steering wheel (2)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos