Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : Gear oil

Peugeot 208 - Gear oil

Peugeot 208 (2012-2019 / A9, MK 1)
How to replace engine oil in Peugeot 208?
In this tutorial we can see how to replace the gearbox oil in the Peugeot 208, a very simple operation which requires good manual skills. First of all we lift …read all…
Posted on 21 May 2023 by ScegliAuto
Loudspeaker (2) Shock absorbers (1) Antenna (1) Car stereo (23) Anti roll bar (1) Roof Rack Bars (1) Battery (22) Arm (2) Spark plugs (3) Glow plugs (1) Bodywork (1) Control unit (1) Key (8) Timing belt (12) V-belt (3) -board computer (24) Checks and maintenance (91) Dashboard (4) Brake discs (3) Headlight (7) Tail light (3) Fog lights (5) Particulate filter (2) Air filter (13) Cabin air filter (15) Diesel filter (5) Oil filter (1) Clutch (2) Grille (2) Light bulb (4) Side turn signal light bulb (1) Headlight bulb (10) Rear light bulb (4) Interior lights ceiling light bulb (2) Antifreeze liquid (2) Dashboard light (1) License plate light (3) Handle (1) Muffler (1) Gear oil (1) Engine oil (7) Door panel (7) Front bumper (2) Rear bumper (2) Brake pads (4) Tires (4) Gear Shift Knob (4) Fuel pump (1) Door (1) Instrument cluster (32) Wheel (1) Fuse box (21) Brake system (1) Outside rearview mirror (11) Manufacturer's coat of arms (1) Windscreen wipers (2) EGR valve (1) Interior blower (1) Side window (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos