Peugeot 208 - Shocks - DIY video guides

Do it yourself

Frequently asked questions about cars and motorcycles

Car tutorial (Do it yourself)

Motorcycle tutorial (Do it yourself)

Frequently Asked Questions

Car
Peugeot
208

Peugeot 208 - Shocks

Years 2019-2026
Years 2012-2019

Shocks Peugeot 208 (2019-2026 / up, uw, ub, uj, mk 2)

Peugeot 208 (2012-2019 / MK 1, A9)
How to Change the Rear Shock Absorbers on the Peugeot 208
On the Peugeot 208, replacing the rear shock absorbers is done by working on the rear axle with the car raised and securely supported. After loosening the …Read all…
Posted on 24 August 2026 by ScegliAuto

Peugeot 208 (2012-2019 / MK 1, A9)
How do you replace the front shock absorbers in a Peugeot 208 1?
To replace the front shock absorbers of your Peugeot 208, first place the car on a safe level surface and lift it with a jack, then remove the wheel. Once …Read all…
Posted on 13 October 2025 by ScegliAuto

Peugeot 208 (2012-2019 / MK 1, A9)
How to replace the rear shock absorber of a Peugeot 208
In this video we can see how to replace the rear shock absorber of a Peugeot 208: we lift the car and remove the wheel from the side where we intend to replace …Read all…
Posted on 13 May 2025 by ScegliAuto

Peugeot 208 (2012-2019 / MK 1, A9)
How to Replace the Rear Shock Absorbers of the Peugeot 208
Today, you will learn how to replace the rear shock absorbers of the Peugeot 208. The first step is to loosen the bolts of the right rear wheel before lifting …Read all…
Posted on 31 October 2026 by ScegliAuto

Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2)
How to install sports springs on a Peugeot 208
In this video, you will learn how to fit lowered sports springs on a Peugeot 208: first, remove the wheels and start disassembling the shock absorber by …Read all…
Posted on 24 September 2026 by ScegliAuto

Shocks Peugeot 208 (2012-2019 / mk 1, a 9)

Airbag (1) Alternator (1) Speaker (2) Shocks (5) Antenna (1) Air conditioning (1) Car stereo (35) Anti-roll bar (1) Roof rack bars (1) Battery (29) Control arm (2) Spark plugs (5) Glow plugs (1) Body (6) Control unit (1) Key (30) Timing belt (17) V-belt (4) Air conditioner (1) A/C controls (2) Onboard computer (34) Checks and maintenance (50) Throttle body (1) Dashboard (10) Brake rotors (3) Headlight (17) Tail light (12) Fog lights (11) Diesel particulate filter (2) Air filter (20) Cabin air filter (27) Diesel fuel filter (6) Oil filter (1) Parking brake (2) Clutch (4) Grille (3) Window switch (2) Accessory kit (1) Light bulb (5) Side marker bulb (2) Headlight bulb (20) Tail light bulb (9) Interior dome light bulb (2) Antifreeze coolant (2) Instrument panel light (2) License plate light (9) (2) Handle (2) Transmission fluid (1) Engine oil (10) Clock (37) Door trim panel (18) Front bumper (9) Rear bumper (5) Brake pads (7) Tires (3) Shift knob (8) Fuel pump (1) Car door (2) Instrument cluster (10) Wheel (3) Fuse box (45) Seat (5) Brake system (1) Oxygen sensor (1) Side mirror (25) AdBlue warning light (11) Warning light – error code (34) (1) Tire pressure warning light (51) Service warning light (154) Manufacturer emblem (2) Fuel cap (2) Windshield wipers (7) Blower motor (4) Side window (2) Steering wheel (2)

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!

by ScegliAuto

Peugeot 208 - Shocks

Shocks Peugeot 208 (2019-2026 / up, uw, ub, uj, mk 2)

Shocks Peugeot 208 (2012-2019 / mk 1, a 9)

How to Open the Hood of the BMW X3

More videos