Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : Door panel

Peugeot 208 - Door panel

Peugeot 208 (2019-2024 / UP, UB, MK 2, UJ, UW)
Disassembly of the door panel of the Peugeot 208
Today we will discover the process of how to disassemble the front door panel of the Peugeot 208. As a first step, we open the front door of the car and begin …read all…
Posted on 29 December 2023 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
How to disassemble the door panel of the Peugeot 208.
Below we will see the steps that will allow us to disassemble and replace the door panel, both front and rear, of the Peugeot 208. First of all, we open the …read all…
Posted on 16 October 2023 by ScegliAuto
Peugeot 208 (2019-2024 / UP, UB, MK 2, UJ, UW)
How to remove the door trim panel from Peugeot 208?
The video shows us how to remove the door trim panel from a Peugeot 208 and where the screws are located to hold it in place. We begin to disassemble the …read all…
Posted on 30 May 2023 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
How to remove the door panel of a Peugeot 208
Before we can begin, we will have to go and open the door of our Peugeot 208. We then start by disengaging and removing the insert of the interior handle, …read all…
Posted on 22 January 2024 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
How to remove the door panel of a Peugeot 208
How to remove the door panel (rear right) on Peugeot 208? Before starting the disassembly work, let's disconnect the battery terminals in the engine …read all…
Posted on 2 November 2023 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
How to remove the door panel on Peugeot 208
How to remove the door panel (driver's side) of a Peugeot 208? This video explains how to proceed. Before starting the disassembly work, let's disconnect the …read all…
Posted on 25 October 2023 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
How to remove the door panel of a Peugeot 208
Let's see in this video how to remove the door panel of a Peugeot 208. To begin, we pry around the inside door handle with a spatula. Immediately after, we …read all…
Posted on 4 October 2023 by ScegliAuto
Loudspeaker (2) Shock absorbers (1) Antenna (1) Car stereo (23) Anti roll bar (1) Roof Rack Bars (1) Battery (22) Arm (2) Spark plugs (3) Glow plugs (1) Bodywork (1) Control unit (1) Key (8) Timing belt (12) V-belt (3) -board computer (24) Checks and maintenance (91) Dashboard (4) Brake discs (3) Headlight (7) Tail light (3) Fog lights (5) Particulate filter (2) Air filter (13) Cabin air filter (15) Diesel filter (5) Oil filter (1) Clutch (2) Grille (2) Light bulb (4) Side turn signal light bulb (1) Headlight bulb (10) Rear light bulb (4) Interior lights ceiling light bulb (2) Antifreeze liquid (2) Dashboard light (1) License plate light (3) Handle (1) Muffler (1) Gear oil (1) Engine oil (7) Door panel (7) Front bumper (2) Rear bumper (2) Brake pads (4) Tires (4) Gear Shift Knob (4) Fuel pump (1) Door (1) Instrument cluster (32) Wheel (1) Fuse box (21) Brake system (1) Outside rearview mirror (11) Manufacturer's coat of arms (1) Windscreen wipers (2) EGR valve (1) Interior blower (1) Side window (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos