Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the door panel of the Peugeot 208?

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Door trim panel

To remove the door panel of the Peugeot 208, you need to pry it with an object so that you can detach the trim around the handle and the window switch: once these panels are detached, you can loosen the screws underneath which must also be loosened and removed completely. At this point, you can pry at the bottom to detach the panel, disconnecting all the underlying connectors: the new panel can then be inserted, connected and fixed properly.

Posted on 16 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on a Peugeot 208
How to Remove the Door Panel on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) How to remove the door panel (rear right) on a Peugeot 208? Before starting the removal work, disconnect the battery terminals located in the engine …
How to Remove the Door Panel from a Peugeot 208
How to Remove the Door Panel from a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In this video, learn how to remove the door panel from a Peugeot 208. Start by prying around the internal handle of the door with a spatula. Next, re…
How to Remove the Door Panel on a Peugeot 208
How to Remove the Door Panel on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) How to remove the door panel (driver's side) of a Peugeot 208? This video explains how to proceed. Before starting the disassembly work, disconnect t…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos