Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : How to remove the external handle of the Peugeot 208 door.

Peugeot 208 - Video tutorial

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Handle
Operation: How to remove the external handle of the Peugeot 208 door.

Below we will see the steps that will allow us to disassemble and replace the external handle of the front door of the Peugeot 208. First, we open the front door and start unscrewing the fixing screw of the handle that we find inside the side hole; then we remove the small plastic cap of the handle, subsequently removing the entire opening handle, as shown in the video. At this point, we proceed to install the new handle, subsequently fixing the plastic cap; we fix it correctly by tightening the screw on the side hole!


Posted on 10 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos