Do it yourself
| ||||
|
Peugeot 208 - Brake discs
Peugeot 208 (2012-2019 / A9, MK 1)
Replace Peugeot 208 brake pads and disc How to replace the brake pads with the disc? We see the disassembly of the pieces in the front of a Peugeot 208. We lift the car on a column spike to the …read all… Posted on 18 January 2024 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
Replacement front brake discs Peugeot 208 In this video we will see how to go to replace the front brake discs on a Peugeot 208. Then we are going to unscrew the wheel bolts to be able to extract it. …read all… Posted on 8 December 2023 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
How to replace the brake disc of the Peugeot 208 You have driven so many kilometers and now you are forced to replace the brake disc of your Peugeot? Well, you are in the right place. In this guide I'll …read all… Posted on 22 November 2023 by ScegliAuto Loudspeaker (2) Shock absorbers (1) Antenna (1) Car stereo (23) Anti roll bar (1) Roof Rack Bars (1) Battery (22) Arm (2) Spark plugs (3) Glow plugs (1) Bodywork (1) Control unit (1) Key (8) Timing belt (12) V-belt (3) -board computer (24) Checks and maintenance (91) Dashboard (4) Brake discs (3) Headlight (7) Tail light (3) Fog lights (5) Particulate filter (2) Air filter (13) Cabin air filter (15) Diesel filter (5) Oil filter (1) Clutch (2) Grille (2) Light bulb (4) Side turn signal light bulb (1) Headlight bulb (10) Rear light bulb (4) Interior lights ceiling light bulb (2) Antifreeze liquid (2) Dashboard light (1) License plate light (3) Handle (1) Muffler (1) Gear oil (1) Engine oil (7) Door panel (7) Front bumper (2) Rear bumper (2) Brake pads (4) Tires (4) Gear Shift Knob (4) Fuel pump (1) Door (1) Instrument cluster (32) Wheel (1) Fuse box (21) Brake system (1) Outside rearview mirror (11) Manufacturer's coat of arms (1) Windscreen wipers (2) EGR valve (1) Interior blower (1) Side window (2) |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |