Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Brake Discs on Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Brake rotors

In this video, you will learn how to replace the front brake discs on a Peugeot 208. First, remove the wheel bolts to take off the wheel. Lift the vehicle off the ground and apply some penetrating oil to the caliper bolts: unscrew them and remove the caliper by levering it and retracting the piston. Now, remove the bolts securing the brake caliper bracket using a Torx key. At this point, remove the central bolts of the disc to extract it. Clean everything thoroughly before fitting the new brake disc. Refit the disc, pads, caliper, and finally the wheel!

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Brake Discs and Pads on Peugeot 208
Replacing Front Brake Discs and Pads on Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) If you hear a screeching noise from the front wheels while braking, it is likely that the brake pads are worn down enough to score the discs: in this…
How to change the front discs and pads on the Peugeot 208
How to change the front discs and pads on the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) This detailed video shows how to replace the pads and discs on a first model Peugeot 208. Follow the steps: with the car off and handbrake engaged, o…
How to Replace the Clutch Discs on the Peugeot 208
How to Replace the Clutch Discs on the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Below are the steps to remove and replace the clutch discs on the Peugeot 208. First, raise the vehicle and begin by removing the front right wheel; …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos