Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Fog Light Bulbs on the Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Fog lights

Briefly, we will see the instructions to remove and replace the front fog light bulbs on the Peugeot 208. First, open the bonnet of the vehicle and begin to remove the bumper by unscrewing all the fixing screws located at the top; unscrew the additional screws present on both sides of the front wheel arches, detaching and removing the bumper. At this point, unscrew the internal screws of the fog light, disconnecting the electrical connector; replace the bulb with a new one of the correct type and with the same fitting.

Posted on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Turn on the Fog Lights on a Peugeot 208
How to Turn on the Fog Lights on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) This brief video guide shows how to turn on the fog lights on a first-generation Peugeot 208, produced from 2012 to 2019. Before turning on the fog l…
How to Turn on the Fog Lights on the Peugeot 208
How to Turn on the Fog Lights on the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Fog lights (or driving lights) are useful when visibility is poor, such as in fog; these lights are positioned low on the front of the vehicle to cut…
How to replace the front fog light bulb of the Peugeot 208.
How to replace the front fog light bulb of the Peugeot 208.
Peugeot 208 (2012-2019 / A9, MK 1) In this guide, we will go through the instructions that will allow us to dismantle and replace the front fog light bulb of the Peugeot 208. First, le…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos