Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Turn on the Fog Lights on the Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Fog lights

Fog lights (or driving lights) are useful when visibility is poor, such as in fog; these lights are positioned low on the front of the vehicle to cut through the fog, illuminating close to the road. The rear fog light helps those behind to see your vehicle's presence and dimensions. To turn on the fog lights and rear fog light on this vehicle, locate the control dial on the multifunction lever behind the left side of the steering wheel, and turn it to switch them on and off.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Turn on the Fog Lights on a Peugeot 208
How to Turn on the Fog Lights on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) This brief video guide shows how to turn on the fog lights on a first-generation Peugeot 208, produced from 2012 to 2019. Before turning on the fog l…
Replacing the Front Fog Light Bulbs on the Peugeot 208
Replacing the Front Fog Light Bulbs on the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Briefly, we will see the instructions to remove and replace the front fog light bulbs on the Peugeot 208. First, open the bonnet of the vehicle and b…
Replacement of the rear fog light bulb of the Peugeot 208
Replacement of the rear fog light bulb of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Today we will discover the instructions that will allow us to disassemble and replace the rear fog light bulb of the Peugeot 208. First, we open the …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos