Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : Replacement front brake discs and pads Peugeot 208

Peugeot 208 - Video tutorial

Model: Peugeot 208 MK 1, A9 - Years 2012-2019
Part: Brake pads
Operation: Replacement front brake discs and pads Peugeot 208

If during braking you hear a screeching coming from the front wheels, it is likely that the brake pads have worn out to the point of scratching the discs: in this case both the discs and the pads will have to be replaced; therefore lift the car to remove the wheels, the brake calliper and the relative support by removing the old pads; then proceed with disassembling the brake discs from the hub, brush and grease the disc seat before installing the new ones; clean and install the caliper support, insert the new pads and then the caliper, paying attention to the first braking.


Posted on 21 November 2023 by ScegliAuto



Replacement front brake discs Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) In this video we will see how to go to replace the front brake discs on a Peugeot 208. Then we are going to unscrew the wheel bolts to be able to ext
How to change the front brake pads of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) In today's video tutorial we will see removing and replacing the front brake pads of the Peugeot 208. First we lift the car and remove the front whee
How to replace the front brake pads of a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) How to replace the front brake pads of a Peugeot 208? We raise the car on a column point up to the desired height, immediately after we go to remove

Other guides that may interest you

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos