Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : Brake pads

Peugeot 208 - Brake pads

Peugeot 208 (2012-2019 / A9, MK 1)
How to change the front brake pads of the Peugeot 208
In today's video tutorial we will see removing and replacing the front brake pads of the Peugeot 208. First we lift the car and remove the front wheel, …read all…
Posted on 11 April 2024 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
How to replace the front brake pads of a Peugeot 208
How to replace the front brake pads of a Peugeot 208? We raise the car on a column point up to the desired height, immediately after we go to remove the rim …read all…
Posted on 24 November 2023 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
Replacement front brake discs and pads Peugeot 208
If during braking you hear a screeching coming from the front wheels, it is likely that the brake pads have worn out to the point of scratching the discs: in …read all…
Posted on 21 November 2023 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
How to replace the brake pads on a Peugeot 208
Let's see how to replace the brake pads on a Peugeot 208: we lift the car on a column tip (jack) to the desired height, immediately after we go to remove the …read all…
Posted on 9 November 2023 by ScegliAuto
Loudspeaker (2) Shock absorbers (1) Antenna (1) Car stereo (23) Anti roll bar (1) Roof Rack Bars (1) Battery (22) Arm (2) Spark plugs (3) Glow plugs (1) Bodywork (1) Control unit (1) Key (8) Timing belt (12) V-belt (3) -board computer (24) Checks and maintenance (92) Dashboard (4) Brake discs (3) Headlight (7) Tail light (3) Fog lights (5) Particulate filter (2) Air filter (13) Cabin air filter (15) Diesel filter (5) Oil filter (1) Clutch (2) Grille (2) Light bulb (4) Side turn signal light bulb (1) Headlight bulb (10) Rear light bulb (4) Interior lights ceiling light bulb (2) Antifreeze liquid (2) Dashboard light (1) License plate light (3) Handle (1) Muffler (1) Gear oil (1) Engine oil (7) Door panel (7) Front bumper (2) Rear bumper (2) Brake pads (4) Tires (4) Gear Shift Knob (4) Fuel pump (1) Door (1) Instrument cluster (32) Wheel (1) Fuse box (21) Brake system (1) Outside rearview mirror (11) Manufacturer's coat of arms (1) Windscreen wipers (2) EGR valve (1) Interior blower (1) Side window (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos