Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : Spark plugs

Peugeot 208 - Spark plugs

Spark Plugs Peugeot 208 (2012-2019 / mk 1, a 9)

Peugeot 208 (2012-2019 / MK 1, A9)
How to Replace the Spark Plugs on the Peugeot MK1 1.2 Puretech
On this vehicle, a warning must be given: the spark plugs fitted are of the thin electrode type (such as the NGK 91578 which can be found on auto-doc.it with …Read all…
Posted on 23 June 2026 by ScegliAuto
Peugeot 208 (2012-2019 / MK 1, A9)
Replacing the Spark Plugs on the Peugeot 208 MK1
To replace the spark plugs on the Peugeot 208, open the bonnet of the engine compartment, unclip the connectors of the coils and pull them out. Using an 8mm …Read all…
Posted on 27 October 2026 by ScegliAuto
Peugeot 208 (2012-2019 / MK 1, A9)
How to Replace the Spark Plugs on a Peugeot 208
The steps to replace the spark plugs on a Peugeot 208 are straightforward. The first step is to open the bonnet. The second step is to disconnect the …Read all…
Posted on 7 September 2026 by ScegliAuto
Peugeot 208 (2012-2019 / MK 1, A9)
Replacing the spark plugs on the Peugeot 208
At the scheduled maintenance interval for the Peugeot 208, the spark plugs must be replaced. To perform this operation, open the bonnet of the engine …Read all…
Posted on 20 August 2026 by ScegliAuto
Peugeot 208 (2012-2019 / MK 1, A9)
How to Replace Spark Plugs on a PEUGEOT 208
After placing the car on a ramp or flat surface and securing it properly, open the bonnet and secure it using the prop rod. Place a cloth over the radiator and …Read all…
Posted on 30 March 2026 by ScegliAuto
Airbag (1) Alternator (1) Speaker (2) Shocks (5) Antenna (1) Air conditioning (1) Car stereo (35) Anti-roll bar (1) Roof rack bars (1) Battery (29) Control arm (2) Spark plugs (5) Glow plugs (1) Body (6) Control unit (1) Key (30) Timing belt (17) V-belt (4) Air conditioner (1) A/C controls (2) Onboard computer (34) Checks and maintenance (50) Throttle body (1) Dashboard (10) Brake rotors (3) Headlight (17) Tail light (12) Fog lights (11) Diesel particulate filter (2) Air filter (20) Cabin air filter (27) Diesel fuel filter (6) Oil filter (1) Parking brake (2) Clutch (4) Grille (3) Window switch (2) Accessory kit (1) Light bulb (5) Side marker bulb (2) Headlight bulb (20) Tail light bulb (9) Interior dome light bulb (2) Antifreeze coolant (2) Instrument panel light (2) License plate light (9) (2) Handle (2) Transmission fluid (1) Engine oil (10) Clock (37) Door trim panel (18) Front bumper (9) Rear bumper (5) Brake pads (7) Tires (3) Shift knob (8) Fuel pump (1) Car door (2) Instrument cluster (10) Wheel (3) Fuse box (45) Seat (5) Brake system (1) Oxygen sensor (1) Side mirror (25) AdBlue warning light (11) Warning light – error code (34) Tire pressure warning light (51) Service warning light (154) Manufacturer emblem (2) Fuel cap (2) Windshield wipers (7) Blower motor (4) Side window (2) Steering wheel (2)

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos