Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the spark plugs on the Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Spark plugs

See other generations:
Video tutorial

At the scheduled maintenance interval for the Peugeot 208, the spark plugs must be replaced. To perform this operation, open the bonnet of the engine compartment.

Start with one spark plug by releasing the locking lever of the coil connector. Unscrew the bolt that secures the coil and remove it. Using a 16mm spark plug socket with an extension, unscrew the old spark plug, insert a new spark plug into the socket, and hand-tighten it, finishing the tightening with a torque wrench.

Refit the coil and secure it with its bolt, then insert the electrical connector, locking it with its lever. Repeat the process for the other three spark plugs.


Updated on 20 August 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Peugeot 208
How to Replace the Spark Plugs on a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) The steps to replace the spark plugs on a Peugeot 208 are straightforward. The first step is to open the bonnet. The second step is to disconnect the…
Replacing the Spark Plugs on the Peugeot 208 MK1
Replacing the Spark Plugs on the Peugeot 208 MK1
Peugeot 208 (2012-2019 / MK 1, A9) To replace the spark plugs on the Peugeot 208, open the bonnet of the engine compartment, unclip the connectors of the coils and pull them out. Using…
Replacing the Fuel Pump on a Peugeot 208
Replacing the Fuel Pump on a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Follow these instructions to remove and replace the fuel pump on a Peugeot 208 in simple steps. First, open the rear doors and start by removing the …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos