Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : Tires

Peugeot 208 - Tires

Peugeot 208 (2012-2019 / A9, MK 1)
How do you store the tire pressure in the Peugeot 208 2015?
When replacing the tires of a car, for example, or when the car's control unit has been reset or data loss has occurred, it may be necessary to adjust the …read all…
Posted on 14 May 2024 by ScegliAuto
Peugeot 208 (2019-2024 / UW, UP, UJ, UB, MK 2)
How to reset the tire indicator light on the Peugeot 208?
In this tutorial, we can see how to reset the tire indicator in the Peugeot 208, a very simple and quick operation, to be performed only after restoring the …read all…
Posted on 18 November 2023 by ScegliAuto
Peugeot 208 (2019-2024 / UW, UP, UJ, UB, MK 2)
How to reset the tire pressure warning light on Peugeot 208?
In this tutorial, we can see how to reset the tire pressure warning light in the Peugeot 208, an extremely simple and fast operation. Before proceeding, make …read all…
Posted on 1 May 2023 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
Tire warning light reset on Peugeot 208 car
If the tire warning light comes on, the sensor has detected a sharp drop in pressure in one of your tires. So first, make sure you haven't punctured. If so, …read all…
Posted on 11 February 2024 by ScegliAuto
Loudspeaker (2) Shock absorbers (1) Antenna (1) Car stereo (23) Anti roll bar (1) Roof Rack Bars (1) Battery (22) Arm (2) Spark plugs (3) Glow plugs (1) Bodywork (1) Control unit (1) Key (8) Timing belt (12) V-belt (3) -board computer (24) Checks and maintenance (91) Dashboard (4) Brake discs (3) Headlight (7) Tail light (3) Fog lights (5) Particulate filter (2) Air filter (13) Cabin air filter (15) Diesel filter (5) Oil filter (1) Clutch (2) Grille (2) Light bulb (4) Side turn signal light bulb (1) Headlight bulb (10) Rear light bulb (4) Interior lights ceiling light bulb (2) Antifreeze liquid (2) Dashboard light (1) License plate light (3) Handle (1) Muffler (1) Gear oil (1) Engine oil (7) Door panel (7) Front bumper (2) Rear bumper (2) Brake pads (4) Tires (4) Gear Shift Knob (4) Fuel pump (1) Door (1) Instrument cluster (32) Wheel (1) Fuse box (21) Brake system (1) Outside rearview mirror (11) Manufacturer's coat of arms (1) Windscreen wipers (2) EGR valve (1) Interior blower (1) Side window (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos