Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : Gear Shift Knob

Peugeot 208 - Gear Shift Knob

Peugeot 208 (2012-2019 / A9, MK 1)
How to replace the gear knob of the Peugeot 208
If you want to find out how to replace the gear knob in your first series Peugeot 208, then all you have to do is read the following guide carefully and follow …read all…
Posted on 3 May 2024 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
How to replace the gear knob of a Peugeot 208?
As we can see in this short tutorial, replacing the gear knob of the Peugeot 208 is an extremely simple and quick operation. To do this, it is sufficient to …read all…
Posted on 3 April 2023 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
Replacement of the gear knob of the Peugeot 208
In this video tutorial we will see the steps on how to disassemble and replace the Peugeot 208 gear knob. First we get on board the car and start by …read all…
Posted on 17 December 2022 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
How to disassemble the omello of a Peugeot 208
How to replace the gear knob on your Peugeot 208? Let's see in this video how to proceed with the removal: disconnect the frame of the leather cap with a …read all…
Posted on 12 November 2023 by ScegliAuto
Loudspeaker (2) Shock absorbers (1) Antenna (1) Car stereo (23) Anti roll bar (1) Roof Rack Bars (1) Battery (22) Arm (2) Spark plugs (3) Glow plugs (1) Bodywork (1) Control unit (1) Key (8) Timing belt (12) V-belt (3) -board computer (24) Checks and maintenance (91) Dashboard (4) Brake discs (3) Headlight (7) Tail light (3) Fog lights (5) Particulate filter (2) Air filter (13) Cabin air filter (15) Diesel filter (5) Oil filter (1) Clutch (2) Grille (2) Light bulb (4) Side turn signal light bulb (1) Headlight bulb (10) Rear light bulb (4) Interior lights ceiling light bulb (2) Antifreeze liquid (2) Dashboard light (1) License plate light (3) Handle (1) Muffler (1) Gear oil (1) Engine oil (7) Door panel (7) Front bumper (2) Rear bumper (2) Brake pads (4) Tires (4) Gear Shift Knob (4) Fuel pump (1) Door (1) Instrument cluster (32) Wheel (1) Fuse box (21) Brake system (1) Outside rearview mirror (11) Manufacturer's coat of arms (1) Windscreen wipers (2) EGR valve (1) Interior blower (1) Side window (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos