Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Gear Knob on a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Shift knob

In this video tutorial, we will go through the steps to remove and replace the gear knob on a Peugeot 208. First, get inside the vehicle and start by removing the gear gaiter, unclipping it from the sides and pulling it upwards; then pull firmly on the knob to detach it and remove it along with the gaiter, as shown in the video. Next, separate the knob from the gaiter to replace it with the new one; insert a tie wrap between the knob and gaiter and secure everything onto the gear lever, applying the reverse procedure!

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the gear knob of the Peugeot 208?
How do you replace the gear knob of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To replace the gear knob of the Peugeot 208, you need to lever with an object in order to detach the hooks of the leather cover that surrounds the le…
How to replace the gear lever knob of the Peugeot 208
How to replace the gear lever knob of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Below we will discover the steps that will show us how to disassemble and replace the gear lever knob of the Peugeot 208. First, we get on board the …
How to change the gear knob of the Peugeot 208
How to change the gear knob of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In this article, we will see how to replace the gear knob of the Peugeot 208, which can become damaged over time. The only tool needed will be a pair…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos