Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : Fuel pump

Peugeot 208 - Fuel pump

Fuel Pump Peugeot 208 (2012-2019 / mk 1, a 9)

Peugeot 208 (2012-2019 / MK 1, A9)
Replacing the Fuel Pump on a Peugeot 208
Follow these instructions to remove and replace the fuel pump on a Peugeot 208 in simple steps. First, open the rear doors and start by removing the rear seat; …Read all…
Posted on 21 August 2026 by ScegliAuto
Airbag (1) Alternator (1) Speaker (2) Shocks (5) Antenna (1) Air conditioning (1) Car stereo (35) Anti-roll bar (1) Roof rack bars (1) Battery (29) Control arm (2) Spark plugs (5) Glow plugs (1) Body (6) Control unit (1) Key (30) Timing belt (17) V-belt (4) Air conditioner (1) A/C controls (2) Onboard computer (34) Checks and maintenance (50) Throttle body (1) Dashboard (10) Brake rotors (3) Headlight (17) Tail light (12) Fog lights (11) Diesel particulate filter (2) Air filter (20) Cabin air filter (27) Diesel fuel filter (6) Oil filter (1) Parking brake (2) Clutch (4) Grille (3) Window switch (2) Accessory kit (1) Light bulb (5) Side marker bulb (2) Headlight bulb (20) Tail light bulb (9) Interior dome light bulb (2) Antifreeze coolant (2) Instrument panel light (2) License plate light (9) (2) Handle (2) Transmission fluid (1) Engine oil (10) Clock (37) Door trim panel (18) Front bumper (9) Rear bumper (5) Brake pads (7) Tires (3) Shift knob (8) Fuel pump (1) Car door (2) Instrument cluster (10) Wheel (3) Fuse box (45) Seat (5) Brake system (1) Oxygen sensor (1) Side mirror (25) AdBlue warning light (11) Warning light – error code (34) (1) Tire pressure warning light (51) Service warning light (154) Manufacturer emblem (2) Fuel cap (2) Windshield wipers (7) Blower motor (4) Side window (2) Steering wheel (2)

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos