Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : Headlight

Peugeot 208 - Headlight

Peugeot 208 (2019-2024 / UW, UP, UJ, UB, MK 2)
Replacement of the front headlight bulbs of the Peugeot 208
When a headlight bulb of the Peugeot 208 burns out, we must, for our safety, replace it, also to avoid sanctions. We open the hood of the engine compartment …read all…
Posted on 7 March 2024 by ScegliAuto
Peugeot 208 (2019-2024 / UW, UP, UJ, UB, MK 2)
How are the front and rear lights positioned on the Peugeot 208?
In this video we can see how the front and rear lights are positioned on the Peugeot 208 mk2, which has rather unique headlights: the parking lights are the …read all…
Posted on 29 November 2023 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
How to disassemble the headlight assembly of the Peugeot 208.
Today we will see, in this short and simple guide, the steps that will allow us to disassemble and replace the front headlight assembly of the Peugeot 208. In …read all…
Posted on 14 October 2023 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
How to disassemble the front headlights on the Peugeot 208?
In this tutorial, we can see how to remove the front headlights in the Peugeot 208, a simple operation but requires removing the bumper. First of all, we open …read all…
Posted on 5 August 2023 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
How to replace the front headlight of a Peugeot 208
We can see in this tutorial how to replace the front headlight of a first-generation Peugeot 208, produced from 2012 to 2019. To remove the old headlight, we …read all…
Posted on 10 July 2023 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
How to disassemble the headlight on a Peugeot 208.
If we need to dismantle and replace the front headlight on the Peugeot 208, in the description below we can find step-by-step instructions for replacement and …read all…
Posted on 2 June 2023 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
Removal of the front headlight and bumper of the Peugeot 208
Let's see in this guide the main steps to remove and replace the front light of the Peugeot 208, following the instructions below. First we open the bonnet and …read all…
Posted on 4 November 2022 by ScegliAuto
Loudspeaker (2) Shock absorbers (1) Antenna (1) Car stereo (23) Anti roll bar (1) Roof Rack Bars (1) Battery (22) Arm (2) Spark plugs (3) Glow plugs (1) Bodywork (1) Control unit (1) Key (8) Timing belt (12) V-belt (3) -board computer (24) Checks and maintenance (91) Dashboard (4) Brake discs (3) Headlight (7) Tail light (3) Fog lights (5) Particulate filter (2) Air filter (13) Cabin air filter (15) Diesel filter (5) Oil filter (1) Clutch (2) Grille (2) Light bulb (4) Side turn signal light bulb (1) Headlight bulb (10) Rear light bulb (4) Interior lights ceiling light bulb (2) Antifreeze liquid (2) Dashboard light (1) License plate light (3) Handle (1) Muffler (1) Gear oil (1) Engine oil (7) Door panel (7) Front bumper (2) Rear bumper (2) Brake pads (4) Tires (4) Gear Shift Knob (4) Fuel pump (1) Door (1) Instrument cluster (32) Wheel (1) Fuse box (21) Brake system (1) Outside rearview mirror (11) Manufacturer's coat of arms (1) Windscreen wipers (2) EGR valve (1) Interior blower (1) Side window (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos