Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Headlight Height on the Peugeot 208 MK2

Model: Peugeot 208 UP, UW, UB, UJ, MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Headlight

See other generations:
Video tutorial

In this video, adjust the headlight height on the Peugeot 208. When it leaves the factory, the headlight adjustment is a bit too low, so you need to make an adjustment to suit your needs. Open the front bonnet, and you'll see a adjusting screw on each headlamp unit that allows you to set the height of the beam for your night vision requirements.

Align the headlights against a wall to see where the beam hits; then, using a screwdriver, turn it anti-clockwise to raise the height, and turn it clockwise to lower it.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

How to adjust the headlight height on the Peugeot 208 MK2
How to adjust the headlight height on the Peugeot 208 MK2
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) In this video, we see how to adjust the height of the front headlights of the Peugeot 208. It is advisable to use the inner wheel located at headligh…
Headlight adjustment position on the Peugeot 208
Headlight adjustment position on the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Let's see this very short video, which however gives us an indication of where the headlight adjustment of the Peugeot 208 is located: we open the ho…
How to Set the Language on the Peugeot 208 On-Board Computer
How to Set the Language on the Peugeot 208 On-Board Computer
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) To set a different language on the on-board computer of the Peugeot 208 or a Citroen vehicle, follow these steps: - Turn on the instrument cluster an…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos