Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb on a Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
Video tutorial

In this video, see how to replace the headlight bulb on a Peugeot 208; in this specific case, it is the bulb on the right side; fortunately, in this vehicle, there is enough space to access it without removing anything, so simply reach in and remove the rubber cover that protects the bulb you need to replace, which you can identify from the outside.

Naturally, you will need to disconnect the electrical connector, then grasp the bulb and pull it towards the engine.

When inserting the new bulb, ensure you do not touch the glass bulb with bare hands (as this would significantly reduce its lifespan), simply push it in the same way it was removed. Reconnect the electrical connector.

Replace the rubber cover, and the job is done.


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How do you replace the headlight bulb of a Peugeot 208?
How do you replace the headlight bulb of a Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) It will be possible to replace the headlight bulb of the Peugeot 208 by opening the hood, allowing access to the internal cover panel of the headligh…
How do you replace the front headlight bulb of the Peugeot 208?
How do you replace the front headlight bulb of the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) To replace the headlight bulb of the Peugeot 208, you need to open the hood so that you can access the components located inside the engine compartme…
Replacing the Front Light Bulb of the Peugeot 208
Replacing the Front Light Bulb of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Need to replace the front light bulb? Here’s how to replace the bulb from inside the light of a Peugeot 208. Open the bonnet, and remove the light co…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos