Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlamp Unit from the Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
Video tutorial

In this brief and simple guide, you will learn the steps to remove and replace the front headlamp unit of the Peugeot 208. To remove the headlamp unit, you will need to take off the front bumper; first, open the bonnet and unscrew all the fixing screws of the bumper, removing the screws located on both sides of the wheel arches.

Once the bumper is removed, you can unscrew the screws of the front lamp, disconnecting the electrical connector of the bulbs to take it out; then install the new front headlamp by applying the reverse procedure!


Updated on 22 August 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Peugeot 208?
How to Replace the Rear Light Bulb on a Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) To replace the rear light bulb on a Peugeot 208, open the tailgate to locate the side panel of the boot: this can be completely detached to access th…
How to replace the front headlight bulb of the Peugeot 208
How to replace the front headlight bulb of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) In a few steps, we will see how to disassemble and replace the dipped beam bulb of the front headlight of the Peugeot 208. First, we open the hood of…
How to Replace the Front Headlamp Bulb on a Peugeot 208?
How to Replace the Front Headlamp Bulb on a Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) To replace the front headlamp bulb on a Peugeot 208, open the bonnet to locate the internal cover panel of the headlamp unit. Once this panel is remo…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos