Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front bumper of the Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Front bumper

In this guide, we will discover the steps and procedure for removing and replacing the front bumper of the Peugeot 208. First, open the vehicle's bonnet and start unscrewing the fixing screws found at the top of the front bumper, then unscrew the fixing screws located on both sides of the front wheel arches; gently unclip the bumper from the sides until it is completely removed, as shown in the video. At this point, carry out the repair or replacement of the front bumper, remounting all elements in order.

Posted on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper from a Peugeot 208?
How to Remove the Front Bumper from a Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To replace the front bumper on a Peugeot 208, you need to loosen the screws that secure the bumper to its housing: these screws are located inside th…
How to remove the front bumper on the Peugeot 208?
How to remove the front bumper on the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) In this tutorial we can see how to remove the front bumper on the Peugeot 208, an extremely simple and quick operation. First, open the hood, then un…
Removing Front Bumper of Peugeot 208
Removing Front Bumper of Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Do you want to remove the front bumper of your car? Here’s how to take off the bumper of the Peugeot 208. Open the front engine compartment and lift …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos