Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Bumper of a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Rear bumper

Need to remove the front bumper of a Peugeot 208 if damaged? Here's how to do it from the front of the car. Lift the bonnet and secure it. Remove the retaining screws located at the top of the bumper, unscrew the screws in the wheel arch liners (remove the clips located at the bottom of the bumper). Remove the bumper from the body of the vehicle by hand. To proceed with the installation, align the bumper on the body of the vehicle and tighten all screws around the wheel arch liners and along the perimeter. Use a jack to lift the car.

Updated on 20 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the front bumper of the Peugeot 208
How to replace the front bumper of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In this guide, we will discover the steps and procedure for removing and replacing the front bumper of the Peugeot 208. First, open the vehicle's bon…
Removing Front Bumper of Peugeot 208
Removing Front Bumper of Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Do you want to remove the front bumper of your car? Here’s how to take off the bumper of the Peugeot 208. Open the front engine compartment and lift …
Guide to Removing the Front Bumper of the Peugeot 208
Guide to Removing the Front Bumper of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Let’s discover the main steps to remove and replace the front bumper of the Peugeot 208. First, open the bonnet and start unscrewing all the fastenin…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos