Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you dismantle the bumper of the Peugeot 208?

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

See other generations:
Video tutorial

In the example shown here, the bumper has been removed, as can be clearly seen, because it was damaged in an accident, but it may also be removed for other reasons, such as replacing it with sportier models, etc. The disassembly starts from the front wheel arches, which need to be removed to reach the rear pins, then continues with the lower pins and concludes with the upper ones.

When pulling it forward, we must be careful to disconnect the rear connectors of the electrical cables, belonging to the fog lights and nothing else, detach it from the car, and we will have finished.


Posted on 7 June 2025 by ScegliAuto


Related tutorials

Removing Front Bumper of Peugeot 208
Removing Front Bumper of Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Do you want to remove the front bumper of your car? Here’s how to take off the bumper of the Peugeot 208. Open the front engine compartment and lift …
Removing Front Bumper of a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Need to remove the front bumper of a Peugeot 208 if damaged? Here's how to do it from the front of the car. Lift the bonnet and secure it. Remove the…
How to Remove the Front Bumper of the Peugeot 208
How to Remove the Front Bumper of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Follow these steps to remove the front bumper of the Peugeot 208: - Open the bonnet; - Remove the plastic clips covering the screws; - Unscrew the up…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos