Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Headlight bulb

In a few steps, we will see how to disassemble and replace the dipped beam bulb of the front headlight of the Peugeot 208. First, we open the hood of the car and start removing the plastic cover that protects the bulbs; then we disconnect the electrical connector of the dipped beam bulb and release the metal clip to remove the bulb from the headlight assembly, as shown in the video. At this point, we install the new bulb, of the correct type and with the same fitting; we check the functioning of the light, also replacing the other bulbs of the headlight assembly if necessary!

Posted on 17 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front headlight bulb of the Peugeot 208?
How do you replace the front headlight bulb of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To replace the headlight bulb of the Peugeot 208, you need to open the hood so that you can access the components located inside the engine compartme…
How do you replace the headlight bulb of a Peugeot 208?
How do you replace the headlight bulb of a Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) It will be possible to replace the headlight bulb of the Peugeot 208 by opening the hood, allowing access to the internal cover panel of the headligh…
How do you replace the front headlight bulb of the Peugeot 208?
How do you replace the front headlight bulb of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) In order to replace the headlight bulb of the Peugeot 208, you need to open the hood so that you can locate the inner covering panel of the optical g…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos