Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlamp Bulbs of the Peugeot 208

Model: Peugeot 208 UB, UJ, UP, MK 2, UW - Years 2019-2026
Part: Headlight

When a dipped beam bulb of the Peugeot 208 burns out, you must replace it for your safety and to avoid penalties. Open the bonnet and position yourself near the headlamp containing the bulb to be replaced. You will need to work inside, which requires good manual dexterity and patience due to the tight space. Remove the rubber cover and unclip the retaining clip that holds the bulb in place, then pull it out and disconnect the connector. Take out the old bulb and replace it with a new H7, being careful not to touch the glass with bare hands. Refit it by reversing the previous steps.

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Light on Peugeot 208
Replacing the Rear Light on Peugeot 208
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) In this guide, we will cover the main instructions on how to remove and replace the rear light on a Peugeot 208. First, open the rear boot lid and st…
Removing the Front Headlight and Bumper on a Peugeot 208
Removing the Front Headlight and Bumper on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) This guide outlines the main steps to remove and replace the front headlight on a Peugeot 208. First, open the bonnet and remove the plastic cover lo…
How to replace the front fog light bulb of the Peugeot 208.
How to replace the front fog light bulb of the Peugeot 208.
Peugeot 208 (2012-2019 / A9, MK 1) In this guide, we will go through the instructions that will allow us to dismantle and replace the front fog light bulb of the Peugeot 208. First, le…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos