Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : Engine oil

Peugeot 208 - Engine oil

Peugeot 208 (2012-2019 / A9, MK 1)
How to reset the oil service on the Peugeot 208?
In this tutorial we can see how to reset the oil service in the Peugeot 208, an extremely simple and fast operation, to be carried out only once the scheduled …read all…
Posted on 21 February 2024 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
How to change the engine oil and oil filter in the Peugeot 208?
Before we start, let's get the materials we need: a new oil filter, a specific detergent, and a container of motor oil. With the car turned off and parked on a …read all…
Posted on 15 July 2023 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
How do you replace the engine oil in a Peugeot 208?
To be able to change the engine oil of the Peugeot 208 you have to go and lift the car, so that you can loosen the oil tank drain plug, located in the lower …read all…
Posted on 1 June 2023 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
Oil change on Peugeot 208
Replacing exhausted oil and filter on a Peugeot 208? Let's see how everything is replaced. We open the car door and pull up the engine compartment opening …read all…
Posted on 8 December 2023 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
Oil and filter change on Peugeot 208
Let's see how to do the service on a Peugeot 208 including the oil and filter change. Let's see how to proceed. We lift the car on a jack and unscrew the pin …read all…
Posted on 14 November 2023 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
How to change oil on Peugeot 208
How to replace oil and filter on Peugeot 208 engine? Let's see in this how to proceed with the replacement: open the car door and pull up the engine …read all…
Posted on 4 November 2023 by ScegliAuto
Peugeot 208 (2012-2019 / A9, MK 1)
How to change the oil and filter on the Peugeot 208
The replacement of the engine oil and its filter is one of the first maintenance procedures that you learn and do do it yourself, but it is recommended to …read all…
Posted on 14 October 2023 by ScegliAuto
Loudspeaker (2) Shock absorbers (1) Antenna (1) Car stereo (23) Anti roll bar (1) Roof Rack Bars (1) Battery (22) Arm (2) Spark plugs (3) Glow plugs (1) Bodywork (1) Control unit (1) Key (8) Timing belt (12) V-belt (3) -board computer (24) Checks and maintenance (92) Dashboard (4) Brake discs (3) Headlight (7) Tail light (3) Fog lights (5) Particulate filter (2) Air filter (13) Cabin air filter (15) Diesel filter (5) Oil filter (1) Clutch (2) Grille (2) Light bulb (4) Side turn signal light bulb (1) Headlight bulb (10) Rear light bulb (4) Interior lights ceiling light bulb (2) Antifreeze liquid (2) Dashboard light (1) License plate light (3) Handle (1) Muffler (1) Gear oil (1) Engine oil (7) Door panel (7) Front bumper (2) Rear bumper (2) Brake pads (4) Tires (4) Gear Shift Knob (4) Fuel pump (1) Door (1) Instrument cluster (32) Wheel (1) Fuse box (21) Brake system (1) Outside rearview mirror (11) Manufacturer's coat of arms (1) Windscreen wipers (2) EGR valve (1) Interior blower (1) Side window (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos