Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil and Filter on a Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

To change the oil and filter on a Peugeot 208, start by parking the car on a stable surface and leaving the engine slightly warm. Safely lift the vehicle and prepare a container to collect the used oil under the sump.

Unscrew the filler cap in the engine compartment and then remove the drain bolt located at the bottom, allowing the used oil to flow out completely. When the draining is finished, reinstall the cap. Next, move to the oil filter: unscrew and remove it, and install the new element after lightly oiling the seal.

Screw the filter on until it is properly tightened. Pour the new oil through the upper filler neck, respecting the quantity specified by the manufacturer.

Check the level with the dipstick and add oil if necessary. Finally, start the engine for a few seconds, turn it off, and check for any leaks around the filter and drain plug.


Posted on 12 June 2026 by ScegliAuto


Related tutorials

Replace Oil Filter on Peugeot 208
Replace Oil Filter on Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Replace the engine oil filter on a Peugeot 208? Replace oil and filter. Lift the front bonnet, unscrew the worn oil filter and fit a new one after dr…
How to Change Oil on a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) How to replace the oil and filter on a Peugeot 208 engine? Follow these steps for the replacement: open the car door and pull up the engine bay relea…
How to change the air filter of the Peugeot 208
How to change the air filter of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) If you are looking for a guide to help you complete the replacement of the engine air filter for your Peugeot 208, then all you have to do is pay att…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos