Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Oil on a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Engine oil

How to replace the oil and filter on a Peugeot 208 engine? Follow these steps for the replacement: open the car door and pull up the engine bay release lever located at the bottom left of the dashboard and lift the front bonnet, securing it. Using a socket wrench, unscrew the large securing bolt of the container cap (where the oil filter is located), lift the car with a jack (or column lift) and unscrew the bolt from the oil sump; allow the fluid to drain into a container. Finally, top up with the new fluid and close the front bonnet.

Updated on 6 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Change the Engine Oil in a Peugeot 208?
How to Change the Engine Oil in a Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) In this tutorial, you will see how to change the gearbox oil in a Peugeot 208, a very simple operation but one that requires good manual skills. Firs…
How to Change the Engine Oil of the Peugeot 208?
How to Change the Engine Oil of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To change the engine oil of the Peugeot 208, lift the car so you can loosen the drain plug of the oil reservoir located at the bottom of the engine b…
Oil change reset on a Peugeot 208
Oil change reset on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In today's video, we can see how to reset the oil change indicator light on a Peugeot 208, first generation model produced from 2012 to 2019. This op…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos