Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : How to remove the upholstery from the Peugeot 208 door.

Peugeot 208 - Video tutorial

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Door
Operation: How to remove the upholstery from the Peugeot 208 door.

In this video, we see how to remove the upholstery from the door of a Peugeot 208. We will start by removing the glossy black plastic handle, which is only inserted by pressure. The upper part, also made of glossy plastic, must be removed using the same method, and always quite delicately, from the bottom to the top, as there are small tabs that can break. On the inside, we will find a cap covering a screw that needs to be unscrewed. We will also notice two bolts inside the handle. If we look closely around the door, we will find three other caps covering three screws that need to be unscrewed to dismantle the entire door. We remove a small snap-on part on the top, then the window control panel by disconnecting the electrical connector, and then we pull the panel forcefully, leveraging from the bottom. Once we have moved the panel aside, we only need to remove the electrical connector of the speaker.


Posted on 20 August 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos