Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Speaker Replacement on Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Speaker

Open the door and unscrew the two outer screws, then the one underneath. Remove the cover inside the handle and unscrew the now exposed screw, allowing you to then remove the window switch (disconnecting the connector). Remove the handle, revealing two more screws to remove underneath it. After removing these, unscrew the last screw located by the mirror. Finally, you can remove the door panel. At this point, you will start unscrewing again: there are three screws securing the speaker. After removing them, fit the new speaker and then the panel, proceeding obviously in reverse order.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Speakers in the Peugeot 208
Replacing the Speakers in the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Improve the audio quality of your Peugeot 208 by replacing the standard speakers with higher-quality ones: first, remove the door panels. Take off th…
When to Replace the Timing Belt on the Peugeot 208?
When to Replace the Timing Belt on the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) The timing belt synchronises the operation of the crankshaft with the camshaft (which controls the movement of valves and pistons) and, in some cases…
Replacing the Rear Light on Peugeot 208
Replacing the Rear Light on Peugeot 208
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) In this guide, we will cover the main instructions on how to remove and replace the rear light on a Peugeot 208. First, open the rear boot lid and st…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos