Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Oil Filter on Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Oil filter

See other generations:
Video tutorial

Replace the engine oil filter on a Peugeot 208? Replace oil and filter. Lift the front bonnet, unscrew the worn oil filter and fit a new one after draining.

Lift the car with a jack to access the oil sump. Remove the screws from the oil sump cover panel, drain the engine oil into a container.

Refit the oil sump cover panel. Lower the 208 and unscrew the oil filler cap. Top up with new engine oil and close the front bonnet after maintenance.

Test the proper functioning of the car.


Updated on 29 March 2026 by ScegliAuto


Related tutorials

Oil Change on Peugeot 208
Oil Change on Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Replacing the used oil and filter on a Peugeot 208? Here's how to replace everything. Open the car door and pull up the engine compartment release le…
Oil and Filter Change on Peugeot 208
Oil and Filter Change on Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Learn how to service your Peugeot 208, including the oil and filter change. Follow these steps. Lift the car using a jack and unscrew the bolt from t…
How to Change the Engine Oil of the Peugeot 208?
How to Change the Engine Oil of the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) To change the engine oil of the Peugeot 208, lift the car so you can loosen the drain plug of the oil reservoir located at the bottom of the engine b…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos