Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil of the Peugeot 208?

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Engine oil

To change the engine oil of the Peugeot 208, lift the car so you can loosen the drain plug of the oil reservoir located at the bottom of the engine bay. Once the plug is removed, let all the used oil flow into a container, then remove the oil filter located behind the reservoir. After replacing the filter, close the drain plug and open the bonnet to access the engine bay: top up through the breather on the left side of the engine block.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 208 (2012-2019 / A9, MK 1) Replacing the used oil and filter on a Peugeot 208? Here's how to replace everything. Open the car door and pull up the engine compartment release le…
Peugeot 208 (2012-2019 / A9, MK 1) Replace the engine oil filter on a Peugeot 208? Replace oil and filter. Lift the front bonnet, unscrew the worn oil filter and fit a new one after dr…
Peugeot 208 (2012-2019 / A9, MK 1) On the Peugeot 208, resetting the maintenance interval and oil light is done directly from the instrument cluster. With the Peugeot 208 stationary an…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos