Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change on Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Engine oil

Replacing the used oil and filter on a Peugeot 208? Here's how to replace everything. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and unscrew the oil cap. Lift the car on a jack and unscrew the bolt of the oil sump (if you want to replace the oil); let the fluid drain into a container. Remove the plastic panel inside the engine compartment, and using a socket spanner, unscrew the oil filter holder. Extract the worn oil filter and position a new one. Fill the engine with new oil.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace Oil Filter on Peugeot 208
Replace Oil Filter on Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Replace the engine oil filter on a Peugeot 208? Replace oil and filter. Lift the front bonnet, unscrew the worn oil filter and fit a new one after dr…
How to Reset the Service Light on the Peugeot 208
How to Reset the Service Light on the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) On the Peugeot 208, resetting the maintenance interval and oil light is done directly from the instrument cluster. With the Peugeot 208 stationary an…
Oil and Filter Change on Peugeot 208
Oil and Filter Change on Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Learn how to service your Peugeot 208, including the oil and filter change. Follow these steps. Lift the car using a jack and unscrew the bolt from t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos