Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : How to change the engine oil and oil filter in the Peugeot 208?

Peugeot 208 - Video tutorial

Model: Peugeot 208 MK 1, A9 - Years 2012-2019
Part: Engine oil
Operation: How to change the engine oil and oil filter in the Peugeot 208?

Before we start, let's get the materials we need: a new oil filter, a specific detergent, and a container of motor oil. With the car turned off and parked on a flat surface, let's open the front hood to access the oil cap and add the detergent. Let's start the engine for 10/15 minutes, but without putting the car in gear. Let's turn off the engine, lift the car on jack stands, and open the oil pan bolt to drain the old oil. Then, let's move to the filter and loosen it with a spider wrench and remove it. Let's lubricate the gasket of the new filter and install it. Let's lower the car and add the new motor oil.


Posted on 15 July 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 208 2019-2026 - Why did the oil light turn on in the Peugeot 208? Read Answer
    • 208 2019-2026 - What is the amount of engine oil needed for replacement on a petrol Peugeot 208? Read Answer
    • 208 2019-2026 - What to do if the engine oil light comes on in Peugeot 208? Read Answer
    • 208 2012-2019 - How much oil does it take for a Peugeot 208 1.6 HDI? Read Answer
    • 208 2012-2019 - How much does a Peugeot 208 service cost? Read Answer
    • 208 2012-2019 - How much does it cost to change the oil and filter of the Peugeot 208? Read Answer
    • 208 2012-2019 - How much does the first service cost of the Peugeot 208 1.2? Read Answer
    • 208 2012-2019 - After how many km must the Peugeot 208 be serviced for the first time? Read Answer

How to open the Piaggio Beverly saddle with a flat battery

In today's video we see how to open the Piaggio Beverly saddle in case the service battery has run out. First we proceed by opening the compartment on the shield, using the appropriate key. Inside we will find a lever that we will have to pull; at the same time we proceed to unhook the saddle, lifting it. These two operations together, with a little elbow grease, will allow you to open the saddle in cases of extreme need. In fact, we recommend carrying out this operation only if strictly necessary, otherwise it could compromise the correct functioning of the mechanism in the long run.

Watch the video!


by ScegliAuto

More videos