Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on a Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
Video tutorial

This tutorial shows how to replace the front headlight on a first-generation Peugeot 208, produced from 2012 to 2019. To remove the old headlight, first unscrew the three bolts securing it in place; two of these are located in the engine bay near the headlight and are easily visible.

The third bolt is more difficult to access as it is behind the bumper; to reach it, you need to remove the front wheel and the plastic arch liner.

Once the three bolts are removed, disconnect the headlight bulb wiring and then take out the headlight. Fit the new one by reversing the steps.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulbs on a Peugeot 208
How to Replace the Headlight Bulbs on a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Let's see how to replace the bulbs mounted in the front headlight of a Peugeot 208: open the bonnet by pulling the lever located at the bottom right …
Replacing Dipped Beam Bulb on Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Need to replace bulbs on your Peugeot 208? Here's how to remove them. Open the front bonnet by pulling the lever located at the bottom right of the d…
How to Replace the Headlight Bulbs on a Peugeot 208
How to Replace the Headlight Bulbs on a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) How do you replace the bulbs fitted in the front headlight of a Peugeot 208? Open the bonnet by pulling the lever located at the bottom right of the …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos