Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Dipped Beam Bulb on Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
This video is currently unavailable

Need to replace bulbs on your Peugeot 208? Here's how to remove them. Open the front bonnet by pulling the lever located at the bottom right of the dashboard and secure it with the prop.

Remove the headlamp cover caps (as shown in the video). Once the caps are removed, take out the bulb holder from the headlamp.

Disconnect the bulbs from the holder. Replace the damaged bulbs and refit the bulb holder into the headlamp.

Refit the previously removed headlamp cover cap. Finally, test the lights for proper operation. After testing, close the front bonnet.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Replacing the Dipped Beam Bulb on a Peugeot 208
Replacing the Dipped Beam Bulb on a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) This operation can be easily performed by anyone without the use of specific tools. To replace the dipped beam bulb on your Peugeot 208, first open t…
How to Replace the Front Headlamp Bulb on a Peugeot 208
How to Replace the Front Headlamp Bulb on a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) These brief and simple steps will show you how to remove and replace the dipped beam bulb of the front headlamp on a Peugeot 208. First, open the bon…
How to replace the dipped beam bulb on the Peugeot 208 MK1?
How to replace the dipped beam bulb on the Peugeot 208 MK1?
Peugeot 208 (2012-2019 / MK 1, A9) To replace the dipped beam bulb on the Peugeot 208 MK1, open the bonnet and locate the rubber cover at the back of the headlight assembly. Remove it …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos