Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped Beam Bulb on a Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

This operation can be easily performed by anyone without the use of specific tools. To replace the dipped beam bulb on your Peugeot 208, first open the bonnet, then remove the rubber cover of the headlight you will be working on using the designated tab. Carefully disconnect the plastic connector, push down and then sideways the spring you see in front of you. You can then gently pull out the faulty bulb and replace it with the new one, making sure to reattach the spring first and then the plastic cap. Check that it lights up correctly and close the bonnet.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to replace the dipped beam bulb on the Peugeot 208 MK1?
How to replace the dipped beam bulb on the Peugeot 208 MK1?
Peugeot 208 (2012-2019 / MK 1, A9) To replace the dipped beam bulb on the Peugeot 208 MK1, open the bonnet and locate the rubber cover at the back of the headlight assembly. Remove it …
Replacing the radiator fluid on the Peugeot 208 MK1
Replacing the radiator fluid on the Peugeot 208 MK1
Peugeot 208 (2012-2019 / MK 1, A9) In this video, we will see the instructions on how to replace the coolant on the first series Peugeot 208. First, open the bonnet and begin by unscre…
How to disassemble the air conditioning controls of the Peugeot 208
How to disassemble the air conditioning controls of the Peugeot 208
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) Today we will discover the instructions that will allow us to disassemble and eventually replace the air conditioning controls of the Peugeot 208. Fi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos