Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the radiator fluid on the Peugeot 208 MK1

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Antifreeze coolant

In this video, we will see the instructions on how to replace the coolant on the first series Peugeot 208. First, open the bonnet and begin by unscrewing the cap of the radiator expansion tank; then remove the drain hose located under the vehicle to allow for drainage. At this point, reattach the hose and pour the new coolant or antifreeze of the correct type into the expansion tank; fill it up to the maximum level indicated by a mark on the tank itself!

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the AdBlue Reservoir Located in the Peugeot 208?
Where is the AdBlue Reservoir Located in the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) AdBlue is an essential element for the proper functioning of the vehicle's emissions system. The fluid is subject to wear, meaning you need to top it…
How to Top Up AdBlue Fluid on Peugeot 208 - Citroen C3 1.6 BlueHDi
How to Top Up AdBlue Fluid on Peugeot 208 - Citroen C3 1.6 BlueHDi
Peugeot 208 (2012-2019 / A9, MK 1) In today's video, you will learn how to top up AdBlue fluid, which is used to reduce CO2 emissions, on a Peugeot 208 1.6 BlueHDi Euro 6, as well as o…
How to Change Oil on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) How to replace the oil and filter on a Peugeot 208 engine? Follow these steps for the replacement: open the car door and pull up the engine bay relea…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos