Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radiator Fan Resistor on a Peugeot 208

Model: Peugeot 208 - Years 2012-2019

Today, we will look at the main steps to remove and replace the radiator fan resistor on a Peugeot 208. First, open the engine bonnet and start locating the radiator fan resistor, which is positioned at the top of the fan; unscrew the two fixing screws and disconnect the power connector to remove it, as shown in the video. At this point, install the new resistor in the correct orientation, making the connection; then check the correct operation of the cooling fan.

Posted on 6 October 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the cabin fan resistor of the Peugeot 208 located?
Where is the cabin fan resistor of the Peugeot 208 located?
Peugeot 208 (2012-2019 / A9, MK 1) The cabin fan resistor of the Peugeot 208 phase 1 model is located inside the cabin, specifically behind the steering column under the fan. To ensure…
How to Remove the Internal Fan Resistor of the Peugeot 208?
How to Remove the Internal Fan Resistor of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) Today, you will learn how to replace the internal cabin fan resistor of the Peugeot 208. The steps to follow are quite simple and quick. The first st…
How to Fix a Heating Problem in the Peugeot 208 (also 308 and 3008)
How to Fix a Heating Problem in the Peugeot 208 (also 308 and 3008)
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) The problem described in the video, common to the Peugeot 208/308 and 3008, is a fault in the fan resistor (or rheostat). This is an electronic compo…

Other guides you may be interested in

How to Adjust the Handbrake on a BMW 1 Series?

To adjust the handbrake on a BMW 1 Series, use a tool to pry off the leather cover that wraps around the base of the handbrake lever. Once this cover is removed, you will be able to locate the spring that regulates the handbrake tension. At this point, adjust the nut located at the base of the spring: tightening the nut will make the handbrake firmer and reduce the lever's travel. Conversely, loosening the nut will decrease the handbrake's firmness and increase the lever's travel.

Watch the video!


by ScegliAuto

More videos